All Major Brands
Fast Response
$150 Flat Rate Call Out*
Blog

Top 10 Tips on How to Maintain your Automatic Garage Doors

The automatic garage doors are the largest moving parts in your house in Sydney and are used daily in all seasons. To keep your automatic garage doors working efficiently for a long time, it’s important that you take the time to perform regular preventive care and maintenance.

Here are some tips for you to make sure your automatic garage doors run smoothly for decades to come.

1. Look and Listen

The best way to prevent your garage door from malfunctioning is to observe it every time you use it. Is it moving smoothly or is it rough in places? Does it make any scraping or grinding noises? Are the both sides of the system symmetrical?

2.Tighten up the Hardware

Did you know that the average garage door goes up and down a thousand times a year? That’s a lot movement, which can loosen the hardware. Check and tighten all roller brackets and bolts with a socket wrench.

3.Inspect the Rollers

Any type of rollers should be inspected yearly and replaced every seven to ten years, depending on the door’s usage. Worn or cracked rollers need to be replaced as quickly as possible.

4.Change the Weatherstripping

If the rubber weather seal strip is cracked or worn, replace it right away to keep the elements out of your house. Weatherstripping is sold by the foot at hardware stores. All you have to do is to cut to size and insert into the grooves with the wide angle of the flange inside the door.

5.Test the Balance of Your Garage Door

Make sure your automatic garage doors in your Sydney house are properly balanced. Otherwise, the garage door opener will have to work harder, what may affect its lifespan.

After you disconnect the opener by pulling the release handle, move the door about halfway up.

If it doesn’t stay put, the counterweight system is improperly balanced. To adjust garage door spring you may need professional help from Metro Garage Services Sydney.

6.Inspect the Cables

You should never play with the high-tension cables that lift your door because they have enough force to harm you. But you always can check their condition so you know when to call for professional assistance.

7.Lubricate the Moving Parts

It’s good to keep your garage door parts greased up to keep it working efficiently for a long time. It’s a quick and easy process. Use white lithium grease on the opener’s chain and a spray lubricant for the overhead springs.

8.Clear the Tracks

Make sure the tracks on either side of the door are free from debris. Any adjustment to tracks must be done by a professional garage door technician.

9.Check the Auto-Reverse Safety Features

There are two mechanisms: mechanical and photocell. In order to test the mechanical parts. Place a piece of wood or anything hard and place it on the ground in the path of the door. When the door coming down touches the object, it should reverse direction. To test the second, the photoelectric system with beams at each side, close your door and just pass your leg in the door’s path. Your door should reverse.

10.Look after your Automatic Garage Doors

Don’t forget to inspect the door itself. Wood doors will need to be checked for weather damage as well as chipped paint. Steel doors may have rust spots that need to be sanded and painted. Clean your garage door regularly with an all-purpose cleaner.

If you are still facing any issues with your automatic garage doors.

Contact Metro Garage Services from Sydney for a professional assessment and solution.

automatic-garage-doors-sydney
Automatic garage doors sydney